Bibelots IOD Mould 6″x10″

Description

The Bibelots IOD Mould is part of the 2024 IOD Winter release and is an intentionally bare mould designed to be the base for layering up holiday creations like ornaments and labels. beautiful, detailed silicone mould measuring 6 x 10 inches.

All of the designs in this mould are symmetrical, making it perfect for a variety of layouts, such as back-to-back ornaments, but works equally well on flat surfaces, such as door hangers and signage.

Project Suggestions:

• Add bibelots to your baked goods moulds for holiday sugar cookies.

• Cast your mould with clear resin and sandwich beautiful imagery between two sides of the ornament to hang on the tree! You can use all of the cavities at once and batch them for a tree full!

• Adorn the oval mould with small elements from our holiday transfers.

• Drill a tiny hole to hang little crystals or beads from the bottom of these.

• Browse More IOD Moulds Here

  Need More Help using Air Dry Clay in the Bibelots IOD Mould? Grab my list of Tips and Tricks below:

What are IOD Moulds?

IOD Moulds are the most beautifully designed, deeply detailed moulds on the market. They are made from food safe materials (do not use the same set for food and crafts), and can be used to transform and create baked goods, furniture, soaps, jewelry, and more!

You can use IOD moulds with a bazillion different mediums ( yes, we counted.), transforming your projects into masterpieces with ease!

Different Mediums For the Bibelots IOD Mould

IOD Moulds can be used with many different mediums. We
will cover the two most common here. Every medium has its own characteristics,
challenges, and virtues.

Air dry clay, or paper clay:
IOD paper clay is an air dry medium, and one of our favorites. Like most paper pulp
based air dry clays, some shrinking, warping, and cracking is inherent. We like
these qualities for a distressed, authentically vintage look. Our favorite way
to apply moulded pieces is to remove them from the mould while still moist, and
adhere to the surface with the appropriate glue so it conforms well. For
vertical surfaces, use a piece of low tack tape to hold it in place so it
doesn’t slide.

Casting resins:
There are some great pourable resins available. These have completely different qualities than
the paper clay. There is no shrinking or warping, and the castings are more
consistent. Depending on the project, these qualities can be helpful. If you
need to conform them to a curved surface, this can be done if removed from the
mould before it’s completely hardened.

On releases:
We find that most of the time a release is not necessary and the casting will come out without
the use of a release, however, if you are having trouble with the material
sticking (more common with clays than resins), a light dusting of simple
cornstarch or arrowroot is a great choice.